首页 >>> 产品目录 >>> 控制器 更详细的产品分类 西门子控制器   Honeywell温控器   丹纳赫燃烧控制器   Danfoss控制器   利雅路控制器   产品图片 产品名称/型号 产品简单介绍 Siemens LOK16控制器 LOK16 Universally applicable for multistage or modulating oil burners 30 kg/h. Remote reset. Continuous operation. With air pressure check and air damper control. -------------------------------------------------------------------------------- Use Burner controls type LOK16... / LGK16... feature a self-checking flame supervision circuit. That supervision circuit initiates the required safety actions not only in the case of premature or missing flame signals, but also in the event of any kind of fault on the flame detector, the detector cables or the flame signal amplifier that could simulate a flame signal during burner operation. Siemens LOA44控制器 LOA44 For single- or two-stage burners 30 kg/h. Fan connection. Remote reset. With oil pre-heater connection. For air heaters. -------------------------------------------------------------------------------- Use - On burners with an oil throughput of more than 30 kg / h - On stationary direct-fired air heaters (WLE to DIN 4794) - On burners with oil pre-heaters or with heating of the adjustable head. Such heating devices are integrated into the burner control system in a way that they will be switched off should lockout occur - Together with the KF8819 adapter in place of burner control type LAB15.1 or LAB16.3, without having to replace the plug-in base and without having to change the wiring. When using the adapter, the total height of the burner control and the position of the lockout reset button will not change Siemens LOA34控制器 LOA34 For single- or two-stage burners up to 30 kg/h. Fan connection. Partially with remote reset. With oil pre-heater connection. -------------------------------------------------------------------------------- Use - Oil burners with / without oil pre-heaters - Forced draught oil burners conforming to EN 267, with an oil throughput of up to 30 kg/h - Oil atomization burners as monoblocks conforming to EN 230, with an oil throughput of up to 30 kg/h - Special versions including models for incinerator plants and flash-steam generators Siemens LOA24控制器 LOA24 For single- or two-stage burners up to 30 kg/h. Fan connection. Partially with remote reset. With oil pre-heater connection. -------------------------------------------------------------------------------- Use - Oil burners with / without oil pre-heaters - Forced draught oil burners conforming to EN 267, with an oil throughput of up to 30 kg/h - Oil atomization burners as monoblocks conforming to EN 230, with an oil throughput of up to 30 kg/h - Special versions including models for incinerator plants and flash-steam generators Siemens LMO44控制器 LMO44 For single- or two-stage burners 30 kg/h. Fan connection. Remote reset. With failure diagnosis. With oil pre-heater connection. -------------------------------------------------------------------------------- Use The LMO... burner controls are designed for the start-up and supervision of single- or 2-stage forced draught oil burners in intermittent operation. Yellow-burning flames are supervised with photoresistive detectors QRB..., blueburning flames with blue-flame detectors QRC... In terms of housing dimensions, electrical connections and flame detectors, the LMO... are identical to the LOA... oil burner controls. Siemens LMO24控制器 LMO24 For single- or two-stage burners up to 30 kg/h. Fan connection. Remote reset. With failure diagnosis. With oil pre-heater connection. -------------------------------------------------------------------------------- Use The LMO... burner controls are designed for the start-up and supervision of single- or 2-stage forced draught oil burners in intermittent operation. Yellow-burning flames are supervised with photoresistive detectors QRB..., blueburning flames with blue-flame detectors QRC... In terms of housing dimensions, electrical connections and flame detectors, the LMO... are identical to the LOA... oil burner controls. Siemens LMG2控制器 LMG2 For two-stage or modulating burners up to 350 kW. With remote reset and ionization. With failure diagnosis. Fan connection. With air pressure check and air damper control. -------------------------------------------------------------------------------- Use Burner controls of the LMG... range are used for the startup and supervision of singleor 2-stage gas or gas / oil burners in intermittent operation. The flame is supervised with an ionisation probe or UV flame detector QRA... . LMG21... / LMG22... in the same housing replace burner controls LGB21... / LGB22... and, using the adapters, burner controls LFI7... and LFM1... . Application-specific features - Detection of undervoltages - Air pressure supervision with functional test of air pressure monitor during startup and operation - Electrical remote reset - Display of error code and flame signal by LEDs in the lockout reset button - Accurate program sequence owing to the digital processing of signals - LMG49... for atmospheric gas burners 　 Siemens LMO14控制器 LMO14 For single-stage burners up to 30 kg/h. Fan connection. Remote reset. With failure diagnosis. With oil pre-heater connection. -------------------------------------------------------------------------------- Use The LMO... burner controls are designed for the start-up and supervision of single- or 2-stage forced draught oil burners in intermittent operation. Yellow-burning flames are supervised with photoresistive detectors QRB..., blueburning flames with blue-flame detectors QRC... In terms of housing dimensions, electrical connections and flame detectors, the LMO... are identical to the LOA... oil burner controls. Siemens LGK16控制器 LGK16 Universally applicable for multistage or modulating gas burners 350 kW. Remote reset. With air pressure check and air damper control. -------------------------------------------------------------------------------- Use Burner controls type LOK16... / LGK16... feature a self-checking flame supervision circuit. That supervision circuit initiates the required safety actions not only in the case of premature or missing flame signals, but also in the event of any kind of fault on the flame detector, the detector cables or the flame signal amplifier that could simulate a flame signal during burner operation. Siemens LGB4控制器 LGB4 For two-stage or modulating burners up to 350 kW. With remote reset and ionization. With pilot burner connection. -------------------------------------------------------------------------------- Use The LGB... burner controls are used for the startup and supervision of single- or 2-stage gas or gas / oil burners in intermittent operation. Depending on the type of burner control used, the flame is supervised either by an ionization probe, a blue-flame detector QRC1... for forced draft gas / oil burners, or a UV detector QRA... (with auxiliary unit AGQ1...A27). In connection with the respective adapters, the LGB... burner controls replace their predecessor types LFI7... and LFM1... . - Automatic forced draft burners for gaseous fuels to EN 676 - Gas burner controls to EN 298 - Undervoltage detection - Air pressure supervision with functional check of the air pressure monitor during startup and operation - Electrical remote reset facility - LGB41... for use with atmospheric gas burners Siemens LGB3控制器 LGB3 For two-stage or modulating burners up to 350 kW. With remote reset. Fan connection. With air pressure check and air damper control. -------------------------------------------------------------------------------- Use The LGB... burner controls are used for the startup and supervision of single- or 2-stage gas or gas / oil burners in intermittent operation. Depending on the type of burner control used, the flame is supervised either by an ionization probe, a blue-flame detector QRC1... for forced draft gas / oil burners, or a UV detector QRA... (with auxiliary unit AGQ1...A27). In connection with the respective adapters, the LGB... burner controls replace their predecessor types LFI7... and LFM1... . - Automatic forced draft burners for gaseous fuels to EN 676 - Gas burner controls to EN 298 - Undervoltage detection - Air pressure supervision with functional check of the air pressure monitor during startup and operation - Electrical remote reset facility - LGB41... for use with atmospheric gas burners Siemens LGB2控制器 LGB2 For two-stage or modulating burners up to 350 kW. With remote reset and ionization. Fan connection. With air pressure check and air damper control. -------------------------------------------------------------------------------- Use The LGB... burner controls are used for the startup and supervision of single- or 2-stage gas or gas / oil burners in intermittent operation. Depending on the type of burner control used, the flame is supervised either by an ionization probe, a blue-flame detector QRC1... for forced draft gas / oil burners, or a UV detector QRA... (with auxiliary unit AGQ1...A27). In connection with the respective adapters, the LGB... burner controls replace their predecessor types LFI7... and LFM1... . - Automatic forced draft burners for gaseous fuels to EN 676 - Gas burner controls to EN 298 - Undervoltage detection - Air pressure supervision with functional check of the air pressure monitor during startup and operation - Electrical remote reset facility - LGB41... for use with atmospheric gas burners Siemens LFL1控制器 LFL1 Universally applicable for multistage or modulating gas burners 350 kW. Remote reset. With pilot burner connection and ionization. With air pressure check and air damper control. -------------------------------------------------------------------------------- Use The burner controls of the LFL1... range are designed for the control and supervision of forced draught gas burners of both expanding flame and interrupted pilot construction of medium to high capacity. They are universally applicable and can be used for both multistage and modulating burners as well as for dual-fuel burners and for burners of stationary air heaters (WLE to DIN 4794). The difference between series 01 and 02 lies in the duration of the safety time for the pilot burner of burners using pilot gas valves. For atmospheric burners of high capacity, type LFL1.638 is available. Landis & Staefa Siemens LFE1控制器 LFE1 Universally applicable for multistage or modulating gas burners 350 kW. Remote reset. With pilot burner connection and ionization. With air pressure check, air damper control and adjustable program time. -------------------------------------------------------------------------------- Use The LFE1... is designed for the fully automatic control and supervision of single-stage, multi-stage or modulating gas or dual-fuel burners. It is suited for use with expanding flame and interrupted pilot type gas burners. Flame supervision is ensured by means of an ionization probe or a UV flame detector. Ignition spark proving with a UV flame detector is also possible. When used in connection with a gas valve proving system LDU11... (refer to Data Sheet 7696), the control sequence of the LFE1… can be extended to include automatic gas valve proving. All types of LFE1... burner controls comply with the relevant European standards for gas and oil burners of any capacity. The LFE1... can control the following burner plant components: fan motor, flue gas fan, air damper, ignition transformer, 1 to 3 fuel valves, load controller and an external lockout warning device. Siemens LEC1控制器 LEC1 Control unit for double or multi-flame detection. Remote reset. Continuous or intermittent operation. With pilot burner connection. With air pressure check, air damper control and adjustable program time. Applicable in conjunction with separate flame safeguards LAE10..., LFE10.../50... . -------------------------------------------------------------------------------- Use The LEC1... is designed for the fully automatic startup and supervision of forced draft burners with which the flame supervision should or must be carried out by separate flame safeguards, e.g. with Dual supervision of the main flame or of the pilot and main flame by 2 identical or different detectors. Supervision of forced draft oil / gas burners with different types of detectors depending on the selected operating mode. Multiflame supervision that is, central and simultaneous control of the startup and supervision sequence for several burners the flames of which must be individually supervised by one or 2 flame safeguards each. Siemens LAL控制器 LAL Universally applicable for multistage or modulating oil burners 30 kg/h. Remote reset. With air pressure check and air damper control. -------------------------------------------------------------------------------- Use – Control and supervision of oil atomization burners – For burners of medium to high capacity – For intermittent operation (at least one controlled shutdown every 24 hours) – Universally applicable for multistage or modulating burners – For burners of stationary air heaters (WLE to DIN 4794) Siemens LAE1控制器 LAE1 Universally applicable for multistage or modulating oil burners 30 kg/h. Remote reset. With pilot burner connection. With air pressure check, air damper control and adjustable program time. -------------------------------------------------------------------------------- Use The LAE1 in conjunction with the flame detector RAR7 or RAR8 is used for the fully automatic startup and supervision of – single-stage forced draught burners – multi-stage forced draught burners – modulating forced draught burners – of any oil throughput Design, control sequence and setting choices of the LAE1 allow the burner control to be used in almost any type and size of oil-fired combustion plant. Siemens LOA24控制器 Siemens LOA24 用于单段/两段火控制的30KG/H的燃烧机 可外接风机 带复位功能 带油预热器连接功能 Honeywell温度控制器 T9275 T9275控制器是霍尼韦尔公司新一代温度控制器，外形别致、安装方便、操作简单、价格低廉、广泛应用于加热、通风、空调系统。 T9275控制器的微处理器以比例积分积分控制技术为基础，提供友好的人机界面，常用的输入输出信号使控制更加精确，整个设计刻守客户需求和技术革新的原则。 Honeywell 温度控制器 DC1000系列 双排显示PV、SP等数据12种热电偶信号、3种热电阻信号、5种线行信号输入继电器输出、电压、电流信号输出带手/自动模式,切换便利多种辅助输出功能多种控制算法输出:ON/OFF、PID、双重(冷热区)输出、马达阀门控制,单相/三项可控硅控制三路(可选)报警输出,17种报警类型2套各8段设定点程序,切换调用或串接成16段程序使用满量程0.5%精度,EEROM非易失性内存,确保数据在掉电的情况下不会丢失85-225Vac/50(60)HZ供电工作可选RS232/485通信控制 共2页 [首页][前页] 1 2 [后页][尾页]

联系方式 联 系 人：朱玉东 联系电话：021-56352358 021-56352359 传真电话：021-56352360 燃烧机 油泵 控制器 电磁阀 点火变压器 喷嘴 伺服马达 调压阀 点火棒 滤油器 压力开关 感光电眼 油管 比调仪 Honeywell系列 丹纳赫系列 阀门检漏装置 火焰探测器 传感器 燃气安全控制 上海威意阿里巴巴商铺 上海威意机电设备有限公司 上海威意机电设备有限公司 行程开关

	上海威意机电设备有限公司    电话：021-56352358 021-56352359   传真：021-56352360
	地址：上海市新村路1388弄18号101室    邮编：200333    沪ICP备06014783号-1   网站管理入口

网络推广：仪表展览网

技术支持：易展